How do I replace the battery in the controls on my slimline storage heater?

This product is fitted with a replaceable battery in the controls. To replace the battery, follow the steps below.

1. IMPORTANT: Before replacing the battery ensure the heater is isolated from the electricity supply.

2. Unscrew the cover of the user interface and pivot away from the housing. Set the cover and the screw safely to one side.

3. Slide the catch and pull the module up from the User Interface

4. Move the module clear of the User Interface to access the battery

5. Remove the coin cell battery and replace. A CR2032 3.3V coin cell battery is required.

These can be purchased online & from high street stores (ie Amazon, Halfords etc will sell CR2032 batteries).

6. Slide the module back into the User Interface, ensuring the catch in engaged

7. Replace the cover and secure using the screw

Power on the heater an enter the current Date & Time. The heater should now remember this if the heater is disconnected from the mains supply.

Applicable to models:

XLE050 XLE070 XLE100 XLE125 XLE150

TSRE050 TSRE070 TSRE100 TSRE125 TSRE150

NLSH050 NLSH070 NLSH100 NLSH100 NLSH125 NLSH150

DESE050 DESE070 DESE100 DESE125 DESE150

SSHE050 SSHE070 SSHE100 SSHE125 SSHE150

VASH050E VASH070E VASH100E VASH125E VASH150E AC6550 AC6554

Require additional help? Please follow link below