Applicable to models: LA6MI, LA9MI, LA12MI, LA16MI
Issue: Error code H64 shown on the display. No heat, compressor is stopped.
What this means: H64 error is due to a refrigerant high pressure abnormality.
Until an engineer can attend, it should still be possible to use the electric backup. To enable the backup search for the guide "How to I switch on the backup on the LA-MI heat pump?" on the GDHV Help Centre.
Action: Engineer will need to investigate by following the flow diagram below.
Note that only F-GAS qualified engineers are legally allowed to work on the system if they are leak checking or changing refrigerant components!
Malfunction Decision Conditions:
During operation of defrosting and heating, when the outdoor high pressure sensor output signal is 0Vdc or 5Vdc.
Malfunction Caused:
1 Faulty connector connection.
2 Faulty sensor.
3 Faulty outdoor unit PCB (main).
Abnormality Judgment:
Continue 4 times in 20 minutes.
Location of connector & sensor on LA6MI / LA9MI Refrigerant PCB:
Location of connector & sensor on LA12MI / LA16MI Refrigerant PCB:
Possible parts required depending on engineers diagnosis:
• High Pressure Sensor
LA6MI / LA9MI / LA12MI / LA16MI part: X-2511012
• Main Refrigerant PCB (part number depends on model of heat pump)
LA6MI part: X-2511024
LA9MI part: X-2511038
LA12MI part: X-2511044
LA16MI part: X-2511057
Require additional help? Please follow link below
https://glendimplexservice.freshdesk.com/a/solutions/articles/79000136321
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article