Applicable to models:
PLX050E PLX075E PLX100E PLX125E PLX150E GFP050BE GFP075BE GFP100BE GFP150BE GFP200BE
GFP050WE GFP075WE GFP100WE GFP150WE GFP200WE MFP050E MFP075E MFP100E MFP150E MFP200E
LPP050E LPP075E LPP100E LPP150E QRAD050RF QRAD075RF QRAD100RF QRAD150RF QRAD200RF
QRAD050E QRAD075E QRAD100E QRAD150E QRAD200E BPH100M BH100G CEP500E CEP750E CEP1000E CEP1500E CEP2000E CEP050E CEP075E CEP100E CEP150E CEP200E LST050E LST075E LST100E LST150E CAR033 CAR050 CAR075 CAR100 CAR150 CAR200
Issue: Error 001, Fault 001, Error code 1, Error code 20, Red Flashing User Interface screen.
What this means: A flashing red screen with Error code 1 or Error code 20 means the room temperature sensor on the heater is misreading.
Action: Please ensure the heater is not covered up or obstructed in any way (refer to instructions for the required clearances for your exact model of heater- https://www.dimplex.co.uk/support/guides)
Power the heater off at the wall and allow it to cool down, then power it back on again. If the error reappears it could be a faulty room sensor or ACC PCB. See below.
Require additional help? Please follow link below
https://glendimplexservice.freshdesk.com/a/solutions/articles/79000136321
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article