Error code 06 or 12 and SAFE MODE displayed on Slimline storage heater or the screen just flashes Red with no text. What does this mean?


 Applicable to models:  

XLE050 XLE070 XLE100 XLE125 XLE150 

TSRE050 TSRE070 TSRE100 TSRE125 TSRE150 

NLSH050 NLSH070 NLSH100 NLSH100 NLSH125 NLSH150 

DESE050 DESE070 DESE100 DESE125 DESE150 

SSHE050 SSHE070 SSHE100 SSHE125 SSHE150 

VASH050E VASH070E VASH100E VASH125E VASH150E AC6550 AC6554 

 

Issue:  Heater displaying error code 06, error code 12 or flashing red.

 

What this means:  User interface is getting too warm.

 

Action: The main reason is due to the heater being covered or obstructed (i.e furniture in front of the product, curtains blocking air outlet) in any way.

  • Remove any covering or obstruction
  • Make sure the clearances around the heater are observed (see image). 
  • Clothes must not be dried on the heater; decorative radiator covers cannot be used.
  • Power the heater off then on again to attempt to clear the error.

If this is happening to a recently installed heater the installer should be called back to check the installation and ensure the heater is installed as per manufactures instructions.




Require additional help? Please follow link below

https://glendimplexservice.freshdesk.com/a/solutions/articles/79000136321



Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article