WARNING The heater must only be operated with the feet securely fitted and in the upright position.
Never use the heater as a portable appliance without the feet securely fitted using the screws provided.
Before fitting the feet to your heater, you must ensure that you have removed the wall mounting brackets from your heater. The wall mounting brackets supplied are fitted to the base of the heater, where one of the feet would be fitted. Please see the below instructions:
To assemble the feet:
- Lay the heater on its back and remove the wall mounting brackets - see Fig.3, these can be discarded or stored for future use.
- Remove the two foot fixing screws, highlighted in Fig.3.
- Assemble the feet by pressing them firmly into the convector body as indicated in Fig.3, the foot should clip into position.
- Secure using the foot fixing screw,
- Return the convector to the upright position,
The appliance is now ready for use.
Applicable to models: ML2T
Require additional help? Please follow link below https://glendimplexservice.freshdesk.com/a/solutions/articles/79000136321
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article