How do I pair the remote for my AC3RE heater?

To pair the product to the remote:

1. The product, once installed and turned on, will emit a beep and begin to broadcast a signal to be paired with. Please ensure that only one AC is switched on at once when performing the pairing process.

Note: If no remote pairs within 2 minutes, the product will stop broadcasting. 

2. Wake the remote by briefly holding the ENTER button.

Once awake the remote will then immediately search for the product. This is indicated by the rotating loading graphic and flashing connectivity icon on the remote followed by the pairing sequence. 

Note: The remote will attempt to pair with the first product it finds. Please ensure that no other products are broadcasting within the vicinity to prevent pairing to the incorrect product. 

3. The remote will search for devices for 1 minute. If no product can be found, the remote will display ‘NO PROD’ before returning to a sleep state. If this happens, please repeat steps 1 and 2.

4. If connection is successful the product will emit a second beep and the remote screen will show a solid connectivity icon for 4 seconds then revert to the home screen.

NOTE: After initial pairing the Time and Date must be set before the remote will revert to the home screen.